How to Prevent Marble from Turning Yellow?

How to Prevent Marble from Turning Yellow? If you have marble tiling or countertop, marble turning yellow is a very common problem faced by several homeowners. This could be due to improper maintenance or iron staining or recrystallization or anything else.

The cure is based on the cause of marble turning yellow. But prevention is better than cure. In this article, you will see some methods to prevent yellow turning marble.

How to Prevent Marble from Turning Yellow?

It is a crucial aspect to take some preventive actions. At times, the marble maintenance specialist solves the stain and its issue, however, doesn’t correct the cause or prevent it. Preventive actions provide a solution not to stain the marble in the future or you can call it minimizing the stain.

Steps to preventing staining

• Eliminate dirt and other additional agents with a texture brush. Then sanitize and apply a descale clean on the stone and in situ. Now mechanically polish the stone.

• Use an efficient descaling that doesn’t damage the natural form of the marble stone. This guarantees the stone safety for being efficient in removing the various dirt types.

• For efficient removal of yellow stains of the marble, the stone’s absorption capacity should be minimized with the use of an oleo-hydrophobic treatment. This can be altered in permeability.

• Natural stone and marble maintenance of the marble stone is very important. The maintenance generally depends on the usage level and how far the exterior has been impacted.

• It is best to guarantee maintenance using sophisticated cleaning equipment, advanced maintenance products, and cleaning systems.

• Avoid using corrosive products when cleaning the marble floor or countertop.

Below are some of the causes of marble turning yellow:

• Improper maintenance

• Scratching of polished surfaces due to rough usage or use of corrosive materials. Deposits of dirt accumulated in the stone pores making it yellow.

• Wax coating or build-up

• Acrylics, waxes, urethane, and some other coatings are not for marble. The coating tends to become yellow.

• Iron Staining

Solutions to the above problems:

• Improper Maintenance- If this is the cause of yellowing then you need an alkaline cleaner for marble cleaning. A heavy-duty stone cleaner is also better but it should be alkaline. Avoid acid cleaners as they can dull the polish. Use a soft brush for cleaning.
  
  Rinse the product and odor properly. Cleaning should be done until the dirt is eliminated. Repolish if needed with a penetrating sealer. This should improve your marble flooring.

• Wax coating or build up- Yellow coating due to buildup can be stripped to a commercial wax stripper. Professional cleaning is best. They would clean using appropriate cleaners and cleaning equipment. Do not use strong abrasive solutions and cleaning pads.

• Oxidization of iron- They usually contain naturally occurring deposits of iron. Iron is a mineral found in stone that can oxidize when exposed to water like acids and bleach. Do not use white marble during a shower.
  
  The oxidation is enhanced when water or air comes in contact. By eliminating air or water, oxidization will be reduced.

• Iron Staining- Marble tiles have iron deposits that occur in natural form. It is a mineral found in this stone.

Follow the steps below to eliminate iron staining

First method

• Take Sodium Metabisulfite and Sodium Hydro suite solution chemicals and prepare a solution with water.

• Take the solution and soak the marble floor tile area in the solution. Let it be wet for many hours and not let it dry.

• Take a wet vacuum and rinse it thoroughly with a chelating agent and water.

• The marble might need to be repolished if there is marble etching.

Second method

• If the above process fails, prepare a poultice mixture that has to be applied to a small region.

• This is covered using plastic wrap.

• Let it stand for a day. Later eliminate the paste and rinse the region using a chelating agent and water.

• This removes the stain.

Conclusion

To prevent marble from turning yellow, you can purchase a marble that has minimal absorption or use an efficient descaling agent and maintain the marble properly.

Get professional help for repolishing or thorough cleaning and to eliminate iron staining of the marble. Refrain from using harsh and corrosive cleaners over your marble. This way you can impact the marble. Avoid coats or build-up which can result in turning marble yellow.

There are solutions to different problems that yellow the marble, however, use them with a thorough understanding and if needed by a professional.